Diamond Blade

The working principle of Diamond Blade
1. The cutting (in fact it is milling) is carried out by individual diamond crystal exposed on the leading edge and the side of segment or rim
2. The rotating blade is pushed into material by operators, thus the surface diamonds exposed mill a groove in the material.
3. Reducing it to fine powder, when the blade mills the material, the latter exerts wear on the blade.
4. The exposed diamonds may be cracked or broken during the cutting. And the material simultaneously starts to abrade the metal matrix, which gradually releases more diamonds. The more abrasive the material is, the rapider the tendency wears down the matrix.
5. When cutting hard, dense less abrasive materials, the blade requires a softer metal matrix. This will wear down faster, replacing the worn diamonds fairly quickly so that the blade continues to cut.

We'll recommend the right Diamond Blade to you by choosing the right material if you let us know special requirement. White Horse Abrasives Co., Ltd has many years experience of making abrasive products. It is enough for us to offer excellent grinding wheels, diamond blades, sanding disc and other abrasive products for you.