» About Cup Brush
Troubleshooting
| Cause | Cure |
| Brushing effect too little | 1.Increase surface speed by a) brush diameter, b) RPM 2.Decrease trim length 3.Increase diameter of fill material (e.g. Use .35 wire instead of .30 wire, or use grit 120 instead of grit 180) |
| Brushing effect too heavy | 1Reduce surface speed by reducing a) brush diameter, b) RPM
|
| Action of brush peens burr to adjacent surface | 1.Decrease trim length 2.Check position of brush and work piece |
| Finish too coarse and unequal | 1.Decrease trim length 2.Decrease diameter of fill material or grit size 3.Increase surface speed by increasing a) brush diameter, b) RPM |
| Finish too smooth and bright | 1.Increase trim length 2.Increase diameter of fill material or grit size 3.Reduce surface speed by reducing a) brush diameter, b) RPM |